Large Plastic Piston, and a Small Aluminum Piston, the. Pneumatic Machine Can Pull Rivets of Different Sizes with a Large Pull Force. To Achieve Rapid Riveting, Improving Your Work Efficiency. A Set of Four Nozzles: the Package Includes a Total of Four Guide Nozzles of Different Sizes, Allowing You to Choose the Appropriate Guide Nozzle Based on the Diameter of the Rivets While Meeting the Use of Most Rivets on the Market.
Thoughtful Design: Convenient Oil Filling Hole Helps You Quickly Fill Hydraulic Oil When the Rivet Gun Tension Is Insufficient. And the Joint Can Be Rotated 360° to Facilitate Air Admission and Closure.Meanwhile, the Exhaust Port Facilitates Piston Retraction and the Steel Claw Plate Can Help Break the Rivet. Adjustable Pull Force: the Pulling Force (6.7kg/Cm²) Can Be Adjusted According to the Air Pressure, Which Can Meet Your Different Riveting Needs. Strong and Durable: Made of Premium Aluminum with a Debossing Painted Process, It Is Glossy and Can.
Meanwhile, the Cylinder Is Integrally Formed by Gravity Die Casting and Adopts a Quenched Process, Which Is Pressure and Explosion. And the Quenched Iron Nozzle Is. To High Temperatures and Can Withstand High Explosive Tensile Forces, Providing Long-lasting and Powerful Output During Long Operations.
Good Stability: the Thickened Round Base Ensures Good Stability, so You Don't Need to Worry About It Shaking or Tipping over During Use. Guaranteed Customer Service: We Aim to Provide Quality Products and Services. We Will Reply and Solve the Problem for You As Soon As Possible. Material: Aluminum, Iron, Steel, Plastic. Painted Process, Gravity Die Casting Process, Quenched Process.Barometric Pressure: 6-6.7kg/Cm² (0.6-0.65mpa). Suitable Riveting Range: 2.4mm(3/32inch), 3.2mm(1/8inch), 4.0mm(5/32inch), 4.8mm(3/16inch). Gross Weight: 1.6kg/3.5lbs. Package Size: 26.521.512cm/1084in. Product Base Diameter: 8cm/3.15in. Product Size (LH): 11.725.4cm/4.6110in. Ergonomic Handle: the Ergonomic Handle Allows for a Comfortable Hold for a Long Time Without Hand Soreness. It Allows the Cylinder to Quickly Return for High-speed Assembly Operations, Preventing Overloading While Extending Its Service Life. It Is Suitable for Automotive, Hardware, Fastening, General Repair, Aluminum Ladder Assembly and Riveting, Light Steel Keel Riveting, Chassis and Cabinet Riveting, Iron Room Assembly and Riveting, Door and Window Manufacturing, Mechanical Manufacturing, Electronic Manufacturing, Aviation Equipment, Etc.
And Can Be Used for Riveting Nuts Made of Aluminum, Copper, Iron, Stainless Steel, and Other Materials. Place One of the Objects to Be Joined on Top of the Other Object Where You Want Them Joined.
Clamp the Objects Firmly Together. Drill a Hole Through Both Objects. Insert the Long End of a Pop Rivet into the Pop Rivet Gun. Push the Short, Wide End of the Rivet Through the Holes in Both Objects. Squeeze the Trigger of the Pop Rivet Gun Times Until You Hear and Feel a Pop.The Gun Has Popped the Mandril End off of the Pop Rivet and the Two Objects Are Locked Together. The Product Needs to Be Connected to an Air Compressor with an Air Pressure of 13-17 Lbs. Please Read the Manual Completely Before Installation and Use, and Pay Particular Attention to the Safety Instructions Included. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before Ordering. Feedback is very important to us.
It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business.
A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. This item is in the category "Business & Industrial\Light Equipment & Tools\Air Tools\Pneumatic Riveters". The seller is "fabuus" and is located in this country: US.This item can be shipped to United States.