The machine is suitble for kinds of wire terminals. The die sets can be interchangeable with our manual crimping tools.
One die set, one foot air valve, two air pipes. Put the terminal in relevant tool month firstly. Put the stripped insulated conductor into the terminal, push the foot air valve, loose it after crimping well.Cut off gas supply, dismount the fix bolts on the clamp with the L spanner. Replace a desired clamp and screw down the bolt again. Lubricate all mechanical moving joint before operation to increase their service life.
Since the product is pneumatic device, do not operate or store it in environment with high or low temperature and high humidity. Please keep it clean and dry before storage to avoid rusting. Mount dust caps at the gas inlet and outlet or adopt other measures. Dismount the fixed bolts on the clamp with L spanner. Since the clamps are used in pairs, please align them well.
After assembly, press the foot operated gas valve slowly to make the machine work at low speed in order to check the mounted die sets. Before operation, please read the instruction carefully for operating method and technical parameters. Flow in the equipment: Compressed air.Operating condition and flow temperature: 5-60. Medium in the cylinder should be filtrated by filter element above 40um before injectionViz. Gas supply to the cylinder should pass the air filter before operation. Clean all gas hoses and fittings for connecting the pipe line to protect the cylinder. If the machine works in a low temperature environment, you should take some measures to avoid freezing in the system. Medium in the cylinder should be lubricated before operation Viz. Add an atomized lubricator in the gas supply line; turbine 1# oil ISOVG32 is recommended. Tool steel material for durable using. Driven by dual-action normal cylinder. Fit for crimping insulated and non-insulated cable end-sleeves.
Accessories:one foot air valve, two air pipes. By replacing the molds, different types of terminals can be crimped.Precision moulds, and good crimping. Long service life of machine and wear resistance.
Output force: 1.3T Air Pressure 0.5Mpa. Applicable air pressure: 0.50.7Mpa. Range of Application: Non-insulated terminals 16mm²; Rre-insulated terminals 6mm²; Tube terminals 35mm². External dimension: 266 ×142 ×117mm / 9 x 5.6 x 4.6 inch. Weight: 3.5 Kg /7.7lbs.1 x Foot Air Valve. A35WF, A05H, A1016, A06WF2C, A26TW, A0510GF, A02H, A102, A2546B, A04WFL, A2550GF, A04WF, A03B, A03BC. (1)70;(2)25,16;(3)50,6;(4)35,10;(5)25,16;(6)50,6;(7)35,10. (1)6,50; (2)10, 35; (3)16, 25; (4)150, 150; (5)70, 70; (6)95, 95; (7)120, 120; (8)185,185; (9)240; 240. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item "Mophorn Pneumatic Crimping Tool AM-10 Pneumatic Air Power Wire Terminal Crimping" is in sale since Monday, March 16, 2020.
This item is in the category "Business & Industrial\Electrical Equipment & Supplies\Electrical Tools\Hand Crimpers & Strippers". The seller is "frontiertosale" and is located in Rowland Heights, California. This item can be shipped to United States, Canada, Mexico.